Electronics MC Manuale Utente Scaricare il pdf (Pagina 7)

H:\MANUALS\IM0049C.DOC Installation Manual Model MC Shot Flow Controller 7 of 12

4. REMOTE - This LED indicator shows that the control is in the "Remote Mode" and a remote

analog 0-10 Vdc command is expected at screw terminal #10.

5. SETPOINT KNOB - This knob will set the desired shot flow rate when the control is in the

"Local Mode".

6. MODE SWITCH - This switch determines the controller mode of operation.

Right = Forced On

Middle = Forced Off

Left = Ready (waiting for "Enable" signal from machine at terminal #3)

7. DECAL - Space is provided for the customer to make additional notations.

FIGURE 1. FRONT PANEL - Operator Controls

FIGURE 2. FRONT PANEL - Technician Adjustments

Item Description

1. SETPOINT LOCAL/REMOTE - This switch will select whether the setpoint

command comes from the front panel knob or from an external remote analog 0-10 Vdc

command.

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Electronics MC Manuale Utente Pagina 7