Electronics 590-24 Manuale Utente Scaricare il pdf (Pagina 24)

The results of the test are displayed under Results:

This will also show the error between the present value in the table and test results. If the test

results are valid, select F) to enter the data.

F) Enter Catch Data

Purpose: Select to enter test results into memory. Failing to select F) after each test re-

sults in data loss, because it is not automatically stored in memory after each test.

E) Start Remote Test

Purpose: Start the selected test remotely using the Enable signal to the valve. This will

test the valve under actual flow conditions.

G) View Table

Purpose: Displays the present values stored in present Table.

Note: All setpoint values are factory set to requested shot size and flow rate.

1 2 ... 19 20 21 22 23 24 25 26

Nessun commento

Electronics 590-24 Manuale Utente Pagina 24